Has anybody found a match for insignia white in a commercial spray can? I need to paint a fiberglass piece and prefer to not have to buy a quart of enamel and run it thru a spray gun.
Has anybody found a match for insignia white in a commercial spray can? I need to paint a fiberglass piece and prefer to not have to buy a quart of enamel and run it thru a spray gun.
Last edited by desertdave; 08-27-2021 at 06:12 PM.
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy
Don't know what the match is like, probably close.
At least it's made to match Insignia white.
Completed my Classic 4, May 2003. It had std wings. speedster tail.
912 UL Rotax. Sold to a person in Spain.
Completed a Skybolt December 2018
Thanks Taff. I'm hoping to find somebody with real experience with a match. Hopefully somebody will chime in.
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy
Wesco body shop has locations in AZ. Take them any object which has the desired color, and they will custom brew you a rattle can.
IMG_20200802_122153.jpg
This combination is what I have used to "touch up" all the places you have to grind away powder coating. The can in the middle is the custom color and the can on the right is a two part clear that you put over the top. This stuff goes on better than any rattle can experience I've ever had before.
Kitfox 5 (under construction)
Commercial SE/ME, CFII
Thanks Alex! There is a shop right between my house and the airport. I’ll give them a try.
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy