-
Re: IVOProp, 912ULS, Prop Extension and, Spinner
The IVO medium has a backer plate that attaches to the prop flange on the engine, also the plastic and aluminum plates that provide electricity to the prop motor. Those pieces will put the prop blades at least an inch or more ahead of where say warp drive blades would be. Something to consider at least. If my memory is correct, the backer plate is 3/4" thick, and the thin plates are each 1/4". I do have a never used 70" three blade IVO medium for sale, but it's a left hand, so oposite of what you need on the 912. JImChuk
PS I should have read the original post better to start with, you didn't say you were getting an electric inflight adjustable. The ground adjustable prop still uses the backer plate on the prop flange, but doesn't use the two 1/4" rings or plastic insulater plates between them.
Last edited by avidflyer; 02-12-2020 at 08:12 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules