Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: How to mount model 4 rudder trim tab?

  1. #1
    Senior Member
    Join Date
    Jan 2011
    Location
    LAWRENCE, KS
    Posts
    479

    Default How to mount model 4 rudder trim tab?

    Does anyone have a picture of how they mounted a bendable rudder trim tab on a model-4-1200? What is the minimum size for an effective rudder trim tab?
    Also, is anyone putting a bendable tab on the ailerons too?
    I have a servo actuated trim tab on my elevator, but thought the other controls might need one too.
    Let me know, thanks
    Roger

  2. #2
    Senior Member Dave S's Avatar
    Join Date
    Oct 2008
    Location
    St Paul, MN
    Posts
    1,833

    Default Re: How to mount model 4 rudder trim tab?

    Roger,


    Check out this thread; I believe some model IV's responded in the discussion.



    http://www.teamkitfox.com/Forums/sho...ht=rudder+trim


    Also - might do a search on "Rudder trim" using the search function. Lots of posts and maybe lots of suggestions which may fit your particular situation.
    Dave S
    Kitfox 7 Trigear (Flying since 2009)
    912ULS Warp Drive

    St Paul, MN

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •