Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: kitfox 3 vs 4

  1. #11
    Senior Member cap01's Avatar
    Join Date
    Apr 2009
    Location
    yelm, wa
    Posts
    694

    Default Re: kitfox 3 vs 4

    I have model IV sn 1563 was delivered in November of 1991 and is a small tailed 1050. The construction manual is a mix of III and IV instructions . Sorry , don't have the measurements handy
    chuck
    kitfox IV 1050
    912ul warpdrive
    flying B , yelm, wa

  2. #12
    Senior Member HighWing's Avatar
    Join Date
    May 2009
    Location
    Goodyear, AZ
    Posts
    1,743

    Default Re: kitfox 3 vs 4

    My 1992 Model IV-1200 rudder is 53" tall at the hinge.
    Lowell Fitt
    Goodyear, AZ


    My You Tube Channel

  3. #13
    Senior Member cap01's Avatar
    Join Date
    Apr 2009
    Location
    yelm, wa
    Posts
    694

    Default Re: kitfox 3 vs 4

    i had failed to mention that there are some pictures in my album of the mod i did to the tail to install a 1200 rudder that show the difference in vert stab .
    chuck
    kitfox IV 1050
    912ul warpdrive
    flying B , yelm, wa

  4. #14

    Join Date
    Dec 2014
    Location
    Lake Havasu City, AZ
    Posts
    18

    Default Re: kitfox 3 vs 4

    John at the factory says I have a 1050. I guess that is the final word. My rudder at the hinge is 47" and 14' at its widest. I assume that is the size of a Kitfox 3 rudder. Any comments? Thanks in advance. BTW I have enjoyed this forum right from the start. Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •