Rear Access Bulkhead

[Tomfox]

The forward bulkhead (for the rear access plate) appears to be about an inch too large (1/2 inch on each side) both at the top and the bottom. I assume that I am supposed to cut it down - or do I have it in the wrong place. I am mounting it just to the rear of the three vertical braces that join largest rib intersects ( p 58 of the manual).

Thanks

Tom Livermore

[JohnB]

Yeah, I had to cut mine down also. Called Kitfox about this as it seemed unusually large and they said to trim it down.

Happy building,

[Tomfox]

Thanks John - John & Deb Mc are probably on vacation today so haven't responded yet.

Tom Livermore

[AirFox]

Tom, you do have to trim the bulkhead about an inch.

http://www.teamkitfox.com/Forums/alb...pictureid=3715

Here is a picture of how mine turned out from my albums.

Scott

[Tomfox]

Thanks Scott. Mine looks similar to yours now - except yours appears to be MUCH cleaner!! You are apparently better with epoxy than I am.

Tom Livermore

[AirFox]

I had lots of practice by that time. I had already finished up the wings and tail surfaces. Good luck Tom