Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Air Filter Rotax 912 ULS

  1. #1

    Join Date
    Mar 2014
    Location
    Lake Isabella, CA
    Posts
    99

    Default Air Filter Rotax 912 ULS

    Which air filter do I purchase for the 912ULS? I assume that A/C Spruce has them but can't seem to determine which one to use.

    I would like the cone filter.

    Thanks
    Tom Livermore

    SS7 912 ULS

  2. #2
    Senior Member AirFox's Avatar
    Join Date
    Feb 2012
    Location
    Portland, Or
    Posts
    420

    Default Re: Air Filter Rotax 912 ULS

    Here are the K & N filter part numbers. The second numbers are Napa numbers.

    K & N filter R-1060, P00673229, KNER1060

  3. #3
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    536

    Default Re: Air Filter Rotax 912 ULS

    Tom,
    We do stock them...
    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"

  4. #4
    Senior Member AirFox's Avatar
    Join Date
    Feb 2012
    Location
    Portland, Or
    Posts
    420

    Default Re: Air Filter Rotax 912 ULS

    Thanks John I thought about mentioning Kitfox stocks them after I posted the part numbers. I get my filters from Kitfox.

    Thanks John!

  5. #5
    Senior Member
    Join Date
    Nov 2012
    Location
    Desert Aire (Mattawa), WA
    Posts
    218

    Thumbs up Re: Air Filter Rotax 912 ULS

    ....by the way! I'd like to thank you, John for the hospitality recently given at Homedale. My friends and I were on our way back from the Owyhee River area doing some plane camping. We had a spectacular intro of the region guided by Steve Henry (Dead Stick Takeoff - what an unexpected treat!. John took the time to 'fine tune' my Airmaster Prop Control (and it works beautifully! Tested in Hell's Canyon the next day...) as well as a brief factory tour. Thanks again, John and Debra for the V.I.P. hospitality.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •