Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Pop Rivets

  1. #1

    Join Date
    Aug 2014
    Location
    Quesnel B.C.
    Posts
    121

    Default Pop Rivets

    Ok Guy's
    Looking for some rivet advice, I want to put in an order for a bunch of rivets to have on hand for my project. I have been reading a fair bit on the Cherry brand of rivets. There is a pile of styles, sizes and materials. Can you recommend what I should have on hand?
    Kurt A

    Kitfox II,
    Rotax 912,
    1100 gross
    Fixer Upper Project

  2. #2

    Join Date
    Oct 2010
    Location
    Calgary, Alberta
    Posts
    55

    Default Re: Pop Rivets

    Kurt
    Your manual should have all the dash lengths and sizes.
    I would start there .

  3. #3
    Senior Member Peteohms's Avatar
    Join Date
    Sep 2008
    Location
    Leander, TX Hangared @ KGTU
    Posts
    272

    Default Re: Pop Rivets

    In addition to Northof49's suggestion ;-) here is a good reference.

    http://www.zenithair.com/kit-data/ht-87-1.html
    Pete
    Leander, TX
    Model III SN 1000
    912
    Grove

  4. #4
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,959

    Default Re: Pop Rivets

    Why not give Kitfox a call; they can supply whatever you need and might even have a size/length list for the Kitfox II.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  5. #5

    Join Date
    Aug 2014
    Location
    Quesnel B.C.
    Posts
    121

    Default Re: Pop Rivets

    Excellent article Pete. Thanks guy's
    Kurt A

    Kitfox II,
    Rotax 912,
    1100 gross
    Fixer Upper Project

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •