Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: Mod 90 Rotax Coolant Temp creeping up with OAT

  1. #1
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Mod 90 Rotax Coolant Temp creeping up with OAT

    After a 3+1/2 month hiatus, finally got back in the air today. Had a great flight. However, this was the first time I have flown above say 45F. It was 75F and I noticed my cruise coolant temp was a bit higher than anticipated (170F). Coolant level is full and thermostat is operating fine (opening at 140F).

    This is a Kitfox III, 582 Rotax gray head with belly mounted radiator. I was hoping to see maybe 150-160F or is the 170F typical? Concern being how much worse things might get on a hotter day.

    Running the recommended 50/50 mix. Less than 50 hours on all components.

    Anyone run across this before?

    Larry S.

  2. #2

    Join Date
    Jun 2013
    Location
    Baton Rouge, LA
    Posts
    98

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Sounds pretty normal and I'd expect slightly higher with higher temps.

  3. #3
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,959

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Generally speaking, all things being equal such as engine load factor, your coolant and oil temp will rise equal to the ambient temp rise. This is not an exact relationship because engine efficiency changes with temperature, but its a good rule of thumb.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  4. #4

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Hi,

    everything less than 170F is ok.
    During summer I got more than 170F at departure and I try to solve the problem.
    First I fill in a mix with 70% water and 30% antifreeze and I saw very better temps during departure but sometimes I got temps less than 125F in flight level during colder days.
    Then I mount an radio shutter and be able to set the airintake, very fine to set the temperture during flight and approach to hold the enginetemps.
    At last I saw that my cooler had a little part which was'nt able to get airintake, because the part was covered by the "airoutgoing-lip" from cowling.
    It was confirmed by non-insect part at the cooler, have a look at yours. I try to redirect the airflow with a sheed and it works......
    I attached a few pics, I hope it could explain better than my bad english .

    Olaf
    Attached Images Attached Images
    Olaf
    Bonn - Germany
    Kitfox III 582 GSC Prop
    Youtube-Channel

  5. #5
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Great pics, thanks for posting Olaf.

  6. #6

    Join Date
    Jun 2013
    Location
    Baton Rouge, LA
    Posts
    98

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Earlier thread covers this subject pretty well.

    http://www.teamkitfox.com/Forums/showthread.php?t=1690

  7. #7
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Hey Olaf:

    I have the same window blind system to control temps. Did you get that from Highwing LLC? Sure is nice when using cabin heat or on a long decent.

    I had the same airflow blockage issue and droppedlowered (using spacers) the radiator by 3/4" (further into the airstream) and that fixed the issue. I was planning to go your route or maybe even add some vortex generators, however yours looks like a cleaner mod.

  8. #8
    ppilotmike's Avatar
    Join Date
    Apr 2017
    Location
    Oscoda Mi
    Posts
    33

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Quote Originally Posted by LSaupe View Post
    Great pics, thanks for posting Olaf.
    X2. Love your your Youtube channel keep up the great work. Mike

  9. #9

    Default Re: Mod 90 Rotax Coolant Temp creeping up with OAT

    Thank you very much!!!

    I noticed, that I got no information about answers, but I think, I have solved the problem now .

    Yes, I got it from Highwing LLC

    Regards!

    Olaf
    Olaf
    Bonn - Germany
    Kitfox III 582 GSC Prop
    Youtube-Channel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •