Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: I Wonder Who It Was....?

  1. #1
    Senior Member cubtractor's Avatar
    Join Date
    Jul 2011
    Location
    Carl Junction, MO
    Posts
    241

    Default I Wonder Who It Was....?

    I was at Martin State airport (KMTN) a couple of days ago waiting on passengers to arrive and a nice looking green and either off white or gray Model 7 taildragger taxied in and disappeared into the row of hangers. It was right at dusk and my mind was elsewhere in time to remember the N number. Anyone know who it might have been. Just curious.
    Mike Bentley
    Model IV-1200
    Jabiru 2200A #438
    Rotec Aerosport LCH Heads
    Ellison EFS-2 Throttle Body
    Prince Prop (64x34)
    My SPOT Page

  2. #2
    kitfoxnick's Avatar
    Join Date
    Jun 2008
    Location
    Northeastern, MD
    Posts
    199

    Default Re: I Wonder Who It Was....?

    I thought I knew of all the Kitfoxes around here. I don't know any that base out of Martins. I go over to Essex all the time it's just south of MTN under their airspace. If you ever have to stay longer look me up. I have a strip about 20 mins north of MTN.
    Nick W
    IV 1200
    912Ul
    Warp Taper Tip

  3. #3
    Senior Member cubtractor's Avatar
    Join Date
    Jul 2011
    Location
    Carl Junction, MO
    Posts
    241

    Default Re: I Wonder Who It Was....?

    I definitely will Nick. We usually go there a couple times a year but only for a few hours. Usually we go to IAD and are there quite a bit. For some reason N92YD comes to mind for that Kitfox but it doesn't come up anywhere.
    Mike Bentley
    Model IV-1200
    Jabiru 2200A #438
    Rotec Aerosport LCH Heads
    Ellison EFS-2 Throttle Body
    Prince Prop (64x34)
    My SPOT Page

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •