Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 8 of 35 FirstFirst ... 45678910111218 ... LastLast
Results 71 to 80 of 342

Thread: Show us your panel

  1. #71
    Senior Member chefwarthog's Avatar
    Join Date
    Dec 2010
    Location
    Nicolet, Quebec, Canada
    Posts
    269

    Default Re: Show us your panel

    Thanks for the info guys!! It's appreciate. I really like the trim that Phil (desertfox1) install arround the panel...... but Arizona is a long way to go by canoe from Quebec to get it!!!

    Is someone did modify there, to look more customize, by adding some thing to round-up the edge?
    Eric Therrien
    Nicolet, Qc. Ca.
    In preparation.

  2. #72
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,959

    Default Re: Show us your panel

    My photo doesn't show it, but later on I put a rubber edge channel molding on the glare shield edge from Aircraft Spruce part # 05-01600. It just slips on and holds tight without any glue.

    Jim

  3. #73
    Senior Member chefwarthog's Avatar
    Join Date
    Dec 2010
    Location
    Nicolet, Quebec, Canada
    Posts
    269

    Default Re: Show us your panel

    It look like it's a good idear Jim, and by looking closly at the pictures of the LSA sold by John..... it's more appealing with a larger rounded eadge, but it take 1 inch or more of panel space in circumference, with the EFIS that are larger and larger I dont know if two 10'' display can fit with a larger trim..... so the rubber trim seem to be the logical choice.
    Attached Images Attached Images
    Eric Therrien
    Nicolet, Qc. Ca.
    In preparation.

  4. #74
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Show us your panel

    Rmendler,
    WOW! You've got a very full panel. Question: I see you have your GPS mounted in a Gismo. Do you ever take the GPS out of the panel?
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  5. #75

    Join Date
    Mar 2013
    Location
    NC
    Posts
    54

    Default Re: Show us your panel

    Just to clean behind it. It's a lowrance 2000d. Nobody makes updates for it so its useless for primary navigation. I use it as a backup only because it still receives loran gps signals. I will probably replace it someday.

    I use an iPad 2 with foreflight and the new stratus 2 for primary navigation.

    Plus there is always the compass and directional gyro so even in a full electric failure I still have 3 sources of navigation

    Everything was very well laid out making it all easy to look at while flying.

  6. #76
    Set_of_Nine's Avatar
    Join Date
    Apr 2010
    Location
    A J, AZ
    Posts
    6

    Default Re: Show us your panel

    Sorry about the quality of the pic's.
    The night panel looks a whole lot better in person.
    Attached Images Attached Images
    Ray in AJ
    Kitfox IV 912ul N869Y (Building)

  7. #77
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Show us your panel

    Very cool!
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  8. #78
    kitfox5-14WY's Avatar
    Join Date
    Dec 2010
    Location
    Glenrock Wyo.
    Posts
    3

    Wink Re: Show us your panel

    Ok I guess I'll show my Panel. It's still under construction, I just want it to be simple and light weight With the IFly GPS. Just for back country flying.
    Attached Images Attached Images
    Last edited by kitfox5-14WY; 05-01-2013 at 01:52 PM.

  9. #79
    Senior Member
    Join Date
    May 2009
    Location
    Lethbridge, Alberta
    Posts
    270

    Default Re: Show us your panel

    It's finally in. MGL Voyager, V6, Garmin transponder, VPX Sport. Now to program it and finish the setup.
    Attached Images Attached Images

  10. #80
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Show us your panel

    Nice Wannafly,

    This is pretty much the setup I want to run

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •