Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Lifting the Fox for i.e. Wheelchange or maint.

  1. #1
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Lifting the Fox for i.e. Wheelchange or maint.

    Hi Guys, simple question.

    How do you lift the airplame for maintainance or wheelchange.

    Do yu have a jack or did someone come up with an idea?

    Greets
    Tuna

  2. #2
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Lifting the Fox for i.e. Wheelchance or maint.

    Here is a one thread on that topic
    http://www.teamkitfox.com/Forums/sho...king+solutions
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  3. #3
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,960

    Default Re: Lifting the Fox for i.e. Wheelchance or maint.

    I just throw a chunk of 2x4 under the Grove gear clamp block and then use a bottle jack on some larger wooden blocks; very similar to the thread Dorsal references.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •