Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 6 of 6

Thread: Fuel Lines For 912UL

  1. #1
    Hockeystud87's Avatar
    Join Date
    Apr 2016
    Location
    Hood River, OR
    Posts
    177

    Default Fuel Lines For 912UL

    What fuel lines are you guys using? I have thought about using fuel injected lines cause they are stiffer and wont collapse. I'm not sure this is a good idea.

    I have bought some gates barricade fuel line low permutation. It seems to be ok but I am worried it is a little to pliable and may pinch.

    Any thoughts?

  2. #2
    Senior Member
    Join Date
    May 2011
    Location
    MN
    Posts
    469

    Default Re: Fuel Lines For 912UL

    The Gates barricade is what I use. If you are worried about it getting pinched, try and route it someplace else. I am thinking if the possibility of getting pinched would also be a spot that might get worn through via vibrations. Just my 2 cents.

  3. #3
    Hockeystud87's Avatar
    Join Date
    Apr 2016
    Location
    Hood River, OR
    Posts
    177

    Default Re: Fuel Lines For 912UL

    Quote Originally Posted by WWhunter View Post
    The Gates barricade is what I use. If you are worried about it getting pinched, try and route it someplace else. I am thinking if the possibility of getting pinched would also be a spot that might get worn through via vibrations. Just my 2 cents.
    Are you using the carb or fuel injected lines?

  4. #4
    Senior Member
    Join Date
    May 2011
    Location
    MN
    Posts
    469

    Default Re: Fuel Lines For 912UL

    The standard carb type. I ordered a roll of it from online.

  5. #5
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,960

    Default Re: Fuel Lines For 912UL

    I use it also.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  6. #6
    Senior Member Wheels's Avatar
    Join Date
    Oct 2010
    Location
    Spokane Wa
    Posts
    420

    Default Re: Fuel Lines For 912UL

    Are you using gear clamps or push-ons?
    Im looking at push ons and I'm trying to fabricate or duplicate as closely as possible, the connections that came with the engine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •