Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: 912 Rear prop shaft seal replacement

  1. #1

    Join Date
    Dec 2009
    Location
    Hickory, NC
    Posts
    73

    Default 912 Rear prop shaft seal replacement

    Folks,
    Somehow I managed to pinch my oil seal when I was replacing my gearbox after an overhaul so now it leaks. Has anyone ever replace the seal ( the rear one on the crankcase)
    I'm sure it must be in the heavy maintenance manual somewhere but darned if I can find it. errrrr
    Thanks
    Skip

  2. #2

    Join Date
    Apr 2012
    Location
    Oak Harbor,Wa
    Posts
    168

    Default Re: 912 Rear prop shaft seal replacement

    well, the seal is shown in illustrated parts in gearbox section (item 29) and is mentioned in line manual 05-50-00 page three, 1.1, item 5 as "see heavy manual 72-00-00. However, not to be found there. Very strange????

    this info comes from the 912iS manual which is similar to the 912 manual in this section.
    Last edited by neville; 07-26-2015 at 07:55 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •