Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: Continental engine updates

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Nov 2008
    Location
    KDKB (Dekalb, Illinois)
    Posts
    651

    Default Re: Continental engine updates

    Warpdrive and Continental don't like each other, they crack ... I'd look into
    that before I flew it.

    Jeff

  2. #2
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: Continental engine updates

    Quote Originally Posted by n85ae View Post
    Warpdrive and Continental don't like each other, they crack ... I'd look into
    that before I flew it.

    Jeff
    Thanks, I'm gonna check with the McBeans and Warp drive folks. They recommended this prop.
    Tommy Walker in Alabama

  3. #3
    Senior Member
    Join Date
    Nov 2008
    Location
    KDKB (Dekalb, Illinois)
    Posts
    651

    Default Re: Continental engine updates

    There used to be a problem that (at least with the IO-240B's), they were
    cracking the sleeves on the blades at the hub.

    Not sure if that's a problem on yours or not.

    Jeff

  4. #4
    skbenson's Avatar
    Join Date
    Feb 2013
    Location
    Reno
    Posts
    21

    Default Re: Continental engine updates

    I have a three bladeWarp Drive. They suggested I use the heavier hub because of the impulse the Lycoming O-235 will put out, so that's what I installed. Haven't run it yet so don't know if I made a good decision or not.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •