Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Koolprop on jabiru

  1. #1

    Join Date
    Mar 2017
    Location
    Allentown, nj
    Posts
    14

    Default Koolprop on jabiru

    I replaced my wood 60x34 prop with a new 67 inch two blade koolprop with scimitar blades. I flew my kitfox with the new prop today and was pleased.
    The wood prop was dynamically balanced and still shook the windshield compass so badly from cavitation I could not read it. The engine would not rev past 2800 even in a dive.

    Now there is no vibration at all and much quieter. I have the pitch adjusted for 2800 static. It now climbs at 1200 fpm at 70mph and will rev to 3150 level flight

    The wood prop cruised at 2250 rpm at 75mph
    The koolprop is now 2400 rpm at 75mph but much smoother.

    I flew for 1.5 hours today and still need to re learn the landing approach. The new prop is like a brake at idle and I lose airspeed much quicker. With practice I will figure out my finals.

    My top speed is about the same but with less load on the engine. I'm very pleased with my purchase.

  2. #2
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: Koolprop on jabiru

    Congratulations!

    There's a lot of positive buzz about the Kool/Luga props these days.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  3. #3
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,562

    Default Re: Koolprop on jabiru

    Which Kitfox model do you have? I've played with a number of different props since I rebuilt my Avid MK IV. Ended up back with the 64" square tip warp drive 2 blade. What kind of speed were you making at the 3150 rpm. JImChuk

  4. #4
    Senior Member cubtractor's Avatar
    Join Date
    Jul 2011
    Location
    Carl Junction, MO
    Posts
    241

    Default Re: Koolprop on jabiru

    I'm curious as well. I've been running a Prince 64 x 34 with great results. I haven't heard much about the Kool prop.
    Mike Bentley
    Model IV-1200
    Jabiru 2200A #438
    Rotec Aerosport LCH Heads
    Ellison EFS-2 Throttle Body
    Prince Prop (64x34)
    My SPOT Page

  5. #5

    Join Date
    Mar 2017
    Location
    Allentown, nj
    Posts
    14

    Default Re: Koolprop on jabiru

    I have a model 4-1200 speedster. It weighs 641 empty. My engine is s/n 204 which is the oldest version with 572 hours.
    The top speed yesterday was 105 indicated level flight 3150 rpm it was a little bumpy so I didn't hold it there long. Could have crept up if I had smooth air.

    Should I pitch for 3300 level flight? I'm new to the adjustable pitch family.

  6. #6
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,562

    Default Re: Koolprop on jabiru

    Any idea how accurate your ASI is? I did a bunch of math, figuring tip speeds, and then googled tip speed and found this info on the warp drive site.
    http://www.warpdriveprops.com/propspd2.html
    You might be at a better (more efficient) tip speed at the 3150 rpm. Also, if my memory is correct, you have aluminum connecting rods on the earliest engines, later ones are steel. Maybe the lower rpm is less stressful on the engine?? JImChuk

  7. #7

    Join Date
    Mar 2017
    Location
    Allentown, nj
    Posts
    14

    Default Re: Koolprop on jabiru

    I haven't checked my asi accuracy.
    I was also wondering about increasing pitch a little and keeping the engine at a lower rpm for longevity. The old prop wouldn't let the engine rev past 2800 and it has been trouble free for 570 hrs.
    I just hated the noise and vibration. I wanted a longer prop because I'm more interested in stol capabilities than speed. I will look into the tip speed efficiency info. Maybe I should limit rpm to 3000.

  8. #8

    Join Date
    Mar 2017
    Location
    Allentown, nj
    Posts
    14

    Default Re: Koolprop on jabiru

    Using that tip speed calculator you loaded shows my tip speed is Mach .818
    It says maximum performance is .8 to .92
    Seems that I'm good at 3150 max rpm.

  9. #9
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,562

    Default Re: Koolprop on jabiru

    Fourth paragraph says that best performance is at or below 700 fps or 475 mph. At 3150 rpm, your prop tip speed is 628 mph. I think our Jabirus are in need of a gearbox to be most efficient. Nobody wants the extra weight or complexity though. JImChuk

  10. #10

    Join Date
    Mar 2017
    Location
    Allentown, nj
    Posts
    14

    Default Re: Koolprop on jabiru

    Ok yes I went back and read that paragraph. I will need to do some more testing to see if I can get the same performance with more pitch to slow the rpm down some.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •