Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Looking for GSC Prop Spinner Backer Plate

  1. #1
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Looking for GSC Prop Spinner Backer Plate

    Looking for an older Kitfox (Model II or III) aluminum backer plate for the prop spinner (the stamped plate that goes between the prop shaft and prop) that the large aluminum spinner attaches to. If you have one please let me know what it is worth to you. This is an original Kitfox kit supplied item for use with the GSC.

    Friend of mine just picked up a Model II, he has the spinner (loose) but unfortunately he is unable to locate the backer plate and was hoping someone had one laying around there shop/hanger that they were willing to part with.

    Larry

  2. #2
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Re: Looking for GSC Prop Spinner Backer Plate

    For clarification this is a 7" spinner

  3. #3
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Re: Looking for GSC Prop Spinner Backer Plate

    I backer plate has been located. Thanks everyone and have a Happy Thanksgiving!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •