Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Is this "the ultimate homebuilt"??

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member av8rps's Avatar
    Join Date
    Oct 2009
    Location
    Junction City, WI
    Posts
    680

    Default Is this "the ultimate homebuilt"??

    I think this just has to be the ultimate homebuilt. And it gets better...he actually built 2 of them!

    And better yet, the designer / builder of the Explorer is the same guy that created the original aircraft that evolved into our modern Kitfoxes. And at last count there are about 30 derivative designs or copies of the original Avid Flyer.

    https://m.youtube.com/watch?v=RLKNPOSpMpY

    So I just thought you guys might enjoy seeing this incredible homebuilt that was built at Avid aircraft..... (wait for it...) in their spare time (and when I say their spare time, bear in mind that Avid and Kitfox were both shipping as many as 40 kits (each) a month at the time).

    The design and construction of two of these mamoth Explorers alone was a huge task for anyone, but in addition to the design of the Avid and the Explorer, Dean Wilson designed and built, or rebuilt 80 DIFFERENT AIRCRAFT between just the 80's and 90's! (And he's still at it last I spoke with him...).

    Enjoy.
    Last edited by av8rps; 02-05-2015 at 09:23 PM.

  2. #2
    Senior Member cap01's Avatar
    Join Date
    Apr 2009
    Location
    yelm, wa
    Posts
    694

    Default Re: Is this "the ultimate homebuilt"??

    in the early 90s i was working a temp in anchorage. early on a sunday morning of one of my days off i was cursing around merrill field checking out airplanes and one of these happened to be setting on the ramp . it was a amazing airplane . back in those days a person was able to wonder out on the ramp so i was able to do a really good walk around . i was even invited to climb inside . that was before i was aware of the genius of wilson but knew enough about planes to recognize this one as something special . the plane was flying a french film crew around doing some kind of a documentary about alaska . guess they had stopped in anchorage for r and r . they also had a turbo maule on floats flying with them . the explorer that i say was white and i believe it was later destroyed .
    chuck
    kitfox IV 1050
    912ul warpdrive
    flying B , yelm, wa

  3. #3
    Senior Member
    Join Date
    Jul 2013
    Location
    Highlands Ranch, CO
    Posts
    404

    Default Re: Is this "the ultimate homebuilt"??

    Fascinating man!

    He also designed and built this smaller single engine, land version:

    1479465.jpg

    There's a full article somewhere on it, that I can't find right now with full specs and interior photo's.

    And this one with a very cool wing design: http://www.airbum.com/pireps/PirepEllipse.html

    Last I heard he still owned both prototypes (not sure though).

    He is also in the EAA Hall of Fame.

  4. #4
    Senior Member
    Join Date
    May 2011
    Location
    MN
    Posts
    470

    Default Re: Is this "the ultimate homebuilt"??

    I also remember reading the articles about those planes. Basically a flying motorhome, sure wish I could have afforded one.

    There was another small plane at Oshkosh several years back that was ntroduced into the LSA catagory. Unfortunately the plane crashed and the designer perished. I thought it had great potential as a small backcountry mini camper. It was called the Eco-Flyer.
    www.youtube.com/watch?v=Ils0QezjRL8

  5. #5
    Senior Member HighWing's Avatar
    Join Date
    May 2009
    Location
    Goodyear, AZ
    Posts
    1,743

    Default Re: Is this "the ultimate homebuilt"??

    Thanks for posting these pictures. For sure, genius comes rarely and it is good to feel we have had the opportunity to participate in it.

    We had a neighbor here in the Airpark who was a missionary to Africa - Bill Finke. We always refer to him as Reverend Bill. He would spend a month at home, then two months in his compound there. Since ground transportation was such an issue, Bill was heavily into airplanes to get him around. He contracted with Dean Wilson to design him a short field biplane. It was assembled here then put into a container for the trip to Africa where it served for several years until damaged in a landing. Several years after these pictures were taken, Bill died here at home while testing a Rotorway Exec.

    Note the Flaperons and the design of the top one. I never flew in it, but took these pictures during Phase 1 Folks here called it the Venetian Blind.
    Attached Images Attached Images
    Lowell Fitt
    Goodyear, AZ


    My You Tube Channel

  6. #6
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,575

    Default Re: Is this "the ultimate homebuilt"??

    Hi Lowell, that is a different looking airplane for sure. I'm wondering what I"m seeing in the second picture on the verticle stabilizer above where the N # is. Almost looks like it's a.... I'm not sure what it looks like. Can you tell us anything more about the plane or show any more pictures. Thanks Jim Chuk

  7. #7
    Senior Member av8rps's Avatar
    Join Date
    Oct 2009
    Location
    Junction City, WI
    Posts
    680

    Default Re: Is this "the ultimate homebuilt"??

    Yes, he most certainly is a fascinating guy. And as down to earth as anyone you will ever meet.

    Here is a really cool link to an article on his Private Explorer design.

    http://www.ohgizmo.com/200http://www...er-with-wings/

    I remember the Private Explorer flying in front of a really large crowd at Oshkosh doing a flight demonstration while a woman in the back played a full sized chord organ (with the mic running through the aircrafts radio played through the flighline PA system).

    Oh, and most don't know this, but it was also aerobatic! Mild aerobatics, but aerobatic....

    I know there was a small production of these planes built in Canada. Almost all are flying on floats as that was one of the primary design goals of the airplane. And a couple are equipped with a small turboprop engine. I heard they are quite sought after as a floatplane because they offer so much utility, but yet fly nice and are very fuel efficient.

    And here's another link that explains the connection between the Private Explorer and the EcoFlyer.

    http://www.avweb.com/avwebflash/news..._200773-1.html

    Considering all that Dean Wilson has done with aviation, I can only hope that one day he is widely recognized for being one of the most creative aircraft designers of this time. Someone from the Smithsonian told me once that their research shows that the Avid Flyer is probably the most copied light aircraft design of the time, even surpassing the Taylor J2 Cub.

    Amazingly, it took the efforts of a handful of us more than a decade to get Dean into EAA's Hall of Fame. But at least we eventually did. And Dean was more than honored to have finally received that recognition (he's seen little in his lifetime).

    I still own the Avid Flyer prototype, and hope one day it can be put on display somewhere so it can help to recognize Dean's accomplishments.

    Many don't know this, but the design of the Avid Flyer (followed by Kitfox) is what put Rotax on the map for aircraft engines. And today look where they are? (I just read recently that they are now the largest aircraft engine manufacturer in the world?). Well, all that was prompted by Avid and Kitfox builders wanting better engines, and eventally a 4 stroke, which became the 912 (a kitfox 2 was the initial configuration that Rotax designed the 912 for because there were so many being built).

    Plus, Dean was the guy that first mated a gear reduction to a 2 stroke snowmo engine to use it in an airplane. His Avid prototype used a Cuyuna 2 stroke designed for an ultralight (Rotax essentially hadn't come onto the scene yet) spinning s short prop at high rpm. But the climb rate was sickly at 200 fpm. So Dean went to a junkyard and bought a used Ford C3 transmission, and built a 3 to 1 gear reduction from the transmission's planetary drive. Now able spin a big 6 ft long prop at only a little over 2000 rpm, he had thrust! And a 1400 fpm plus climb rate! And the whole ultralight and lightplane movement never looked back since, enjoying lightweight engines that used gearboxes to make a lot of thrust. Again, in the background Dean was making more history.

    And over a decade ago, the Faa used a Kitfox 4-1200 as their poster child for the newly proposed Light Sport Rule. A Kitfox was even parked in a display outside the capital by the Faa to promote their new rule, and educate the public. Because I was involved in the initial meetings that ultimately led to the creation of the Light Sport Rule, I know the Avid and the Kitfox design was used as the initial basis of what a light sport aircraft would be modeled after.

    So had Dean Wilson not ever created that original, 1st Avid Flyer, the world of aviation we enjoy today would likely be a very different place....

    For more info about Dean Wilson dowload the pdf kitplanes oct 2006 article "Design is a way of life for Dean Wilson" by Tim Kerns at:

    http://www.avidflyeraircraft.com/ass...n%20Wilson.pdf

    Paul

    Quote Originally Posted by Danzer1 View Post
    Fascinating man!

    He also designed and built this smaller single engine, land version:

    1479465.jpg

    There's a full article somewhere on it, that I can't find right now with full specs and interior photo's.

    And this one with a very cool wing design: http://www.airbum.com/pireps/PirepEllipse.html

    Last I heard he still owned both prototypes (not sure though).

    He is also in the EAA Hall of Fame.
    Last edited by Av8r3400; 02-07-2015 at 07:21 PM.

  8. #8
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,046

    Default Re: Is this "the ultimate homebuilt"??

    I fixed the link to the article for you, Paul.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  9. #9
    Senior Member av8rps's Avatar
    Join Date
    Oct 2009
    Location
    Junction City, WI
    Posts
    680

    Default Re: Is this "the ultimate homebuilt"??

    Quote Originally Posted by Av8r3400 View Post
    I fixed the link to the article for you, Paul.
    Thanks man. Working from an android notebook, so sometimes my fingerscdo funny things with the copy and paste feature.

  10. #10
    Senior Member cap01's Avatar
    Join Date
    Apr 2009
    Location
    yelm, wa
    Posts
    694

    Default Re: Is this "the ultimate homebuilt"??

    thanks paul for the wilson and explorer stories . i was able to locate the pictures that i was able to take that morning . in the pics it does appear that the spoilers are deployed .
    Attached Images Attached Images
    chuck
    kitfox IV 1050
    912ul warpdrive
    flying B , yelm, wa

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •