Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Model III Brake Assy

  1. 06-13-2015, 02:08 PM #1
    LSaupe
    LSaupe is offline
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Model III Brake Assy

    I am putting together the brakes on a model III and have a question regarding a need for clearance between the caliper mount and the allen head screws which attach everything to the gear. Below are a few pics. The interference blocks about 1/2 of the ultimate travel. Maybe this is not needed? Does the install look correct?





    Reply With Quote Reply With Quote
  2. 06-14-2015, 04:49 AM #2
    LSaupe
    LSaupe is offline
    Senior Member LSaupe's Avatar
    Join Date
    May 2014
    Location
    Galway, NY
    Posts
    217

    Default Re: Model III Brake Assy

    Yep, was able to confirm I need to machine clearance. Another task for the list.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules