Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Anti Chafe Tape Usage?

  1. #1
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Anti Chafe Tape Usage?

    I'm covering the fuselage and haven't found a lot of locations for use of anti chafe tape.... Just wondering where others have used it.

    Thanks!
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  2. #2
    Senior Member t j's Avatar
    Join Date
    Oct 2009
    Location
    Ellensburg, WA
    Posts
    862

    Default Re: Anti Chafe Tape Usage?

    The ends of the bolts that attach the flaperon mixer to the fuselage.
    Tom Jones
    Classic 4 builder

  3. #3
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,966

    Default Re: Anti Chafe Tape Usage?

    Use wherever you have fabric spanning across a sharp edge, or where there is likely to be movement across a sharp edge. I used it on the edges of some reinforcing plates on the fuselage. Didn't want to round the steel edges and break thru the powdercoating.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •