Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Matco w62 wheel

  1. #1

    Join Date
    Oct 2008
    Location
    Bloomfield,MO
    Posts
    14

    Default Matco w62 wheel

    I can't seem to find the torque setting for the 3 bolts that hold the wheel halves together on the matco w62 6 inch wheel (I'm sure it is on their website but I couldn't find it). Watched a youtube video of the installation and it was stated as 50 inch lbs. Does anyone know for certain if this is correct or exactly where I can look it up? Thanks
    Paul Perry KFIV Speedster 1200

  2. #2

    Join Date
    Oct 2008
    Location
    Bloomfield,MO
    Posts
    14

    Default Re: Matco w62 wheel

    Never mind, I finally found it on Matco's site under general information on wheels/brakes (not on the specific w62 wheel)...they listed some part nos with the torque value and I found the bolt part # I needed (MSCAN4-17A) listed at 99 inch lbs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •