Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Kitfox 7A with AeroLEDs Lights

  1. #1
    Dean_aeroleds's Avatar
    Join Date
    Dec 2009
    Location
    Emmett, Idaho
    Posts
    21

    Default Kitfox 7A with AeroLEDs Lights

    Here is a video I posted on You Tube that shows what the AeroLEDs 1600 landing lights (with wig wag) and the Pulsar NSP wingtip lights look like:

    http://www.youtube.com/watch?v=I6nclg5UIJc

    Dean Wilkinson
    CTO, AeroLEDs LLC

  2. #2
    megawatt's Avatar
    Join Date
    Aug 2009
    Location
    Loveland, Ohio
    Posts
    22

    Default Re: Kitfox 7A with AeroLEDs Lights

    Dean,

    Your lights look great, as good as I would ever need. Is your installation different than whats in the assembly manual? Did you make any special modifications or are your lights in the "designated" locations? Thanks, Dave

  3. #3
    Dean_aeroleds's Avatar
    Join Date
    Dec 2009
    Location
    Emmett, Idaho
    Posts
    21

    Default Re: Kitfox 7A with AeroLEDs Lights

    The Pulsar lights have the same footprint as the conventional lights, and mount to the standard Whelen 3 hole screw pattern using a mounting cleat that is provided with the lights.

    The 1600 landing lights are mounted behind clear windows in the tips.

    The plane was built by Mike D'Amico, one of my partners, and you can ask him any specific questions about the Kitfox mounting: mike@aeroleds.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •