Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: brake pressure troubles

  1. #1

    Join Date
    Aug 2015
    Location
    Davenport, Washington
    Posts
    31

    Default brake pressure troubles

    t has all Matco W62 wheels and hydralic brakes and brake cyliders with a remote reservoir. I careflully bled the air.. .

    I installed the double caliper setup as shown by Matco. Still my master cylinders only produce 220psi if I stand on the pedal hard, very hard... It needs a small diameter cylinder I think. There are brake intensifiers from Matco that make the master cylinder 1/2" dia. piston in stead of .625 dia piston so maybe that will work.....I dont think I can make the top of the brake redal taller as my right foot toe fould on the throttle cable belcrank... I could move that I guess..... Matco says I need 450psi for the brakes to work right....its got me stumped.....mark smith

    exfaa@outlook.com

    907-378-9632
    Attached Images Attached Images

  2. #2
    Senior Member Dusty's Avatar
    Join Date
    Dec 2012
    Location
    Christchurch, New Zealand
    Posts
    378

    Default Re: brake pressure troubles

    Is that plumbing right? It would be hard to get all the air out

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •