Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Construction Complete

  1. #1

    Join Date
    Jun 2008
    Location
    Hopkinsville, Kentucky
    Posts
    46

    Default Construction Complete

    After 3.5 yrs and approx 1300hrs, N568DP now has a new airworthiness certificate. Inspection was Sat morning and everything checked out. Had to replace a couple of washers & tighten some jam nuts and clamps. It was a great feeling to have a DAR go over the plane and pronounce it airworthy.

    Vacation is next week, so the plan is to get it to the airport and prep for the first flight. Going to be a long week.
    Danny
    Super Sport
    Completed

  2. #2
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Construction Complete

    Excellent!! looking forward to the first post first flight post.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  3. #3
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,565

    Default Re: Construction Complete

    Danny, congratulations on a momentous achievement.


    Looking forward to your next report knowing you'll prepare for your first flight with as much focus as you utilized for the build.
    Best of luck and enjoy the experience.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  4. #4
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: Construction Complete

    Congratulations Dan!

    Can't wait to hear results of first flight!
    Tommy Walker in Alabama

  5. #5

    Join Date
    Jun 2008
    Location
    Hopkinsville, Kentucky
    Posts
    46

    Default Re: Construction Complete

    Thanks guys, for the encouragement. I'm still in that state of "am I really thru with this", "did I really build an airplane"?? I think it will finally hit me when the wheels leave the ground.
    Danny

  6. #6
    ackselle's Avatar
    Join Date
    Oct 2010
    Location
    Winnipeg, MB
    Posts
    175

    Default Re: Construction Complete

    Congratulations Danny!... but we need pictures!!! You can't announce a completion without showing pictures of your "baby"

    Cheers,
    Ackselle
    Ackselle
    Kitfox IV 1200 Classic C-GIKV
    29" Airstreaks, 11" Matco Tailwheel
    ROTAX 912, Hoffman HO-V352F CS Prop

  7. #7

    Join Date
    Jan 2011
    Location
    Titusville, Florida
    Posts
    27

    Default Re: Construction Complete

    Congratulations and well earned. Looking forward to pix and more pix. Please keep us all informed on your Phase 1 progress.

    OK ....I'll say it...I'm quite envious!!!!!

    Eddie B.

  8. #8

    Join Date
    Jun 2008
    Location
    Hopkinsville, Kentucky
    Posts
    46

    Default Re: Construction Complete

    Here is N568DP, minus paint on the cowling, & paint stripes on the tailfeathers. Working on painting those items before going to the airport to fly.
    Danny
    Attached Images Attached Images

  9. #9
    Senior Member cap01's Avatar
    Join Date
    Apr 2009
    Location
    yelm, wa
    Posts
    694

    Default Re: Construction Complete

    great looking airplane even without the finishing touches . something to be really proud of . have fun and enjoy your first ride
    chuck
    kitfox IV 1050
    912ul warpdrive
    flying B , yelm, wa

  10. #10
    ackselle's Avatar
    Join Date
    Oct 2010
    Location
    Winnipeg, MB
    Posts
    175

    Default Re: Construction Complete

    Lookin' good Danny! Congrats again. Keep us posted on your 1st flight.
    Ackselle
    Kitfox IV 1200 Classic C-GIKV
    29" Airstreaks, 11" Matco Tailwheel
    ROTAX 912, Hoffman HO-V352F CS Prop

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •