Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 10

Thread: O200 engine builders

  1. #1
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default O200 engine builders

    I'm putting together the parts to mount my continental engine. Page 3 of the engine instructions. Call for four 1.75" lengths of a rubber hose mounted on a steel sleeve. The part number is given but it is not on the inventory nor in the engine pkg. There is a seven foot section of fuel line that "seems" to work. Did any continental builders run in to this?

    Kitfox support is not available due to Oshkosh.

    Thanks.
    Tommy Walker in Alabama

  2. #2
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: O200 engine builders

    Hi tommy. I wish i could answer your question. I noticed this some time ago and then forgot about it. I couldn't figure it out either. Im not ready to permanently mount my engine. So i will anxiously await any replies. ken

  3. #3
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: O200 engine builders

    I emailed KF, but they are out of pocket. I brought the instruction sheet home with me and I'm trying to scan the pages that affect me. I plan to email them to Debra and ask her to research it. The parts are listed in the instructions but are not in the inventory list...

    I'm sorta pushed for time, since we are supposed to leave for El Paso for several months on Tuesday. I wanted to get the engine mounted before I left.

    I'll keep you posted, Ken.
    Tommy Walker in Alabama

  4. #4
    Senior Member
    Join Date
    Sep 2008
    Location
    Winchester, KY
    Posts
    299

    Default Re: O200 engine builders

    Tommy, Contact Danny Powell from the members list, he has a SS with a 0200. His has been completed about two years so he has been through this I'm sure.

    Dick B

  5. #5
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: O200 engine builders

    Thanks Dick,

    I'm posting a part of the page with the instructions and will msg Danny. Hopefully he will have a solution, or some other O200 builder will point me to one.
    Attached Images Attached Images
    Tommy Walker in Alabama

  6. #6
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: O200 engine builders

    I hope I didn't violate copyright or confidentiality laws by posting the page. If I did, someone please let me know.

    Thanks,
    Tommy Walker in Alabama

  7. #7
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: O200 engine builders

    Did you find out anything tommy? I went back and looked at my instructions and sure enough i had also circled that item as not found. ken

  8. #8
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: O200 engine builders

    Quote Originally Posted by ken nougaret View Post
    Did you find out anything tommy? I went back and looked at my instructions and sure enough i had also circled that item as not found. ken
    Ken, I'll email you what I've found out....
    Tommy Walker in Alabama

  9. #9
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: O200 engine builders

    Got the engine installed. Went well....

    See pics....
    Attached Images Attached Images
    Tommy Walker in Alabama

  10. #10
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: O200 engine builders

    Very nice! Congradulations.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •