Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: Phase I Performance & Test Results

  1. #1
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,966

    Default Phase I Performance & Test Results

    After finishing my 40 hour Phase I testing I have finally boiled down and gathered all my numbers together. FWIW I thought I would publish them here.

    My airplane is a Kitfox Super Sport equipped as follows: taildragger, Alaskan Bushwheel 8" tailwheel, 21"x 8.0 x 6" Aero-Classic Tundra main tires (no pants), standard wing (no Laker leading edge), Horner wingtips, speedster tail and horizontal, factory plastic wing strut fairings, 3-piece smooth cowl, Rotax 912uls engine, 3-blade Whirlwind GA prop (blades pitched more for cruise than climb), Dynon Skyview avionics.

    Test Results:
    Power off stall-clean 48mph
    -1/2 flaps 45mph
    -full flaps 42-43mph
    Power on stall-clean 43-44mph
    -1/2 flaps 40mph
    Vx - 1/2 flaps 55-60mph (use 60mph for safety)
    Vy - clean 65mph
    1/2 flaps 66mph
    Stability-Longitudinal-static Positive
    -dynamic Positive
    -Lateral Directional Positive
    -Spiral Slight Positive to the right
    Neutral to the left
    Maximum Vne Speed-Tested to 140mph in shallow dive w/ no flutter or control problems
    Cruise Speed at 5000 rpm- 100mph TAS
    5500 rpm- 109mph TAS
    5800 rpm- 116mph TAS
    Maximum Gross Weight Tests at 1320 lbs and 16.0" CG: as reported on previous thread.

    This is all extremely close to the factory predictions so I am well satisfied. Now all that remains is putting it all into a little POH handbook.

    I am thru trying to be a Chuck Yeager and can get back to being an ordinary pilot with still much to learn and lots of fun.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  2. #2
    Senior Member jrevens's Avatar
    Join Date
    Aug 2009
    Location
    Arvada, CO
    Posts
    2,154

    Default Re: Phase I Performance & Test Results

    Jim,
    That sounds great! I may have missed it in an earlier post, but what did your empty weight come in at?
    John Evens
    Arvada, CO
    Kitfox SS7 N27JE
    EAA Lifetime
    Chap. 43 honorary Lifetime

  3. #3
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,966

    Default Re: Phase I Performance & Test Results

    Empty weight was 835 lbs with listed equipment including 3 gallons fuel (1 gal. in header tank and 1 gal. unusable fuel in each wing tank).
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  4. #4
    Senior Member
    Join Date
    Dec 2012
    Location
    Mt Beauty, Australia
    Posts
    1,073

    Default Re: Phase I Performance & Test Results

    thanks for posting all the info Jim, and for all your previous posts that I have found really useful. Congratulations and I hope you really enjoy just flying it now!

    cheer

    ross

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •