Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Dilemma

  1. #21
    Senior Member
    Join Date
    Dec 2008
    Location
    Garland, Texas
    Posts
    1,476

    Default Re: Dilemma

    I'm sorry I got side tracked with being a joker.
    Paul Zimmermann
    LSRM-A
    Garland, Texas

  2. #22
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Dilemma

    No problem by all means be yourself I'm ok with it
    Chase
    Model 5 OutBack
    912 UL

  3. #23
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Dilemma

    well due to my impatience,..I have to redo the N number on the panel,..I should have waited a couple days before I satin clear coated it,..my thoughts were,,if it's laser cut,..the paint should be cured where the laser etched the paint..wrong..
    Chase
    Model 5 OutBack
    912 UL

  4. #24
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Dilemma

    My co pilot wanted to present the photo she is such a ham lol
    Attached Images Attached Images
    Chase
    Model 5 OutBack
    912 UL

  5. #25
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Dilemma

    it had lifted in 2 places,..by the N number and by kitfox outback..I was able to lay it back down with a hair dryer and a roller next to the kitfox outback etching
    Attached Images Attached Images
    Chase
    Model 5 OutBack
    912 UL

  6. #26
    Senior Member
    Join Date
    Dec 2008
    Location
    Garland, Texas
    Posts
    1,476

    Default Re: Dilemma

    Chase,

    Have you verified the hight & width to assure the 6 pack will fit in? I guess you could always lay them down and slide the in, so you should check if your ice packs will fit.

    You might want to add an open container warning.

    All joking aside it looks really great.


    Paul
    Paul Zimmermann
    LSRM-A
    Garland, Texas

  7. #27
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Dilemma

    lol thanks Paul,..it's almost ready to swap out the old panel for this new one,..got a busy week though,.. Hopefully Thursday I end up in Joplin,..and check out Mike's model 4, ..so it might have to wait until the week end to finish it up,.. I know I'm missing my flying time since I started this upgrade,..
    Chase
    Model 5 OutBack
    912 UL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •