Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: weight and balance

  1. #1
    PNWJARED's Avatar
    Join Date
    Feb 2013
    Location
    Enumclaw, WA
    Posts
    51

    Default weight and balance

    Guys, I recently converted by plane from a nose gear to a tailwheel. I am up dating my weight and balance and of course my moment measurements are off. I have an early 7 not the SS. can anyone help with the measurements. I am not near my plane i measured my tailwheel then realized i will also need the new main gear position. I have grove gear. Any help would be appreciated.

    Jared,
    Kitfox 7-Flying
    ABW 26", T3, ABW 3200 Tailwheel
    Rotax 912ULS, Warp Drive Taper

  2. #2
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,959

    Default Re: weight and balance

    The build manual has explicit instructions for working out the weight and balance measurements.They will work for early model 7 as well as the SS.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •