Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 10

Thread: It's done!!!!!

  1. #1

    Join Date
    Sep 2010
    Location
    Sherbrooke, Qc, Canada
    Posts
    17

    Smile It's done!!!!!

    It is done guys. I ordered my new SS kit yesterday and really looking forward to start building. I have to admit that I was hesitating between the Kitfox and the Highlander but the Kitfox is hard to beat. What also influence my decision is by far the great support and community you guys are offering. That make me feel confident and I know in case of problem during the build, this community will never let me down.

    Pat

  2. #2
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: It's done!!!!!

    just curious, how long did they say it would take for your kit to be ready? i ordered mine at the end of january and it is due in mid june.
    and congradulations!
    ken

  3. #3

    Join Date
    Sep 2010
    Location
    Sherbrooke, Qc, Canada
    Posts
    17

    Default Re: It's done!!!!!

    Hi ken, thank you.
    John said it would be ready at the end of august or september. I hope not later. I'll keep you informed.

    Pat

  4. #4
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: It's done!!!!!

    Pat,
    Congrats on your purchase. You're gonna love it.

    Steve, I think the best part of the Kitfox Vid is between 2:39-2:51
    And ... 1:35-1:38; 2:59-3:01; 3:04-3:06; 3:17-3:20 are pretty good too.

    OK, the whole vid is great!!
    Last edited by SkySteve; 05-25-2011 at 10:08 AM.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  5. #5
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: It's done!!!!!

    Congratulations, great plane and fun to build.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  6. #6
    Senior Member chefwarthog's Avatar
    Join Date
    Dec 2010
    Location
    Nicolet, Quebec, Canada
    Posts
    269

    Default Re: It's done!!!!!

    I am please to ear that from you Patrick, let me know went it's arrive and if you need a hand, I will be glad to help you.



    Eric

  7. #7

    Join Date
    Sep 2010
    Location
    Sherbrooke, Qc, Canada
    Posts
    17

    Default Re: It's done!!!!!

    Thank you all!!! I just received my deposit invoice from Debra and the kit is scheduled for october/november production run. That is later than expected. Anyway, more time to study the build manual. That's exciting...

  8. #8
    Senior Member cap01's Avatar
    Join Date
    Apr 2009
    Location
    yelm, wa
    Posts
    694

    Default Re: It's done!!!!!

    i guess its a good thing bad thing . bad that you have to wait but also good that kitfox is alive and well and has lots of orders . kitfox has taken good care of me and nice to see them having lots of work .
    chuck
    kitfox IV 1050
    912ul warpdrive
    flying B , yelm, wa

  9. #9

    Join Date
    Apr 2011
    Location
    Gull Lake Saskat
    Posts
    7

    Default Re: It's done!!!!!

    good for you Carpat. i can't wait till i get something on the go.

  10. #10

    Join Date
    Jan 2011
    Location
    Titusville, Florida
    Posts
    27

    Default Re: It's done!!!!!

    Congratulations Carpat...Welcome aboard. I'm a newbee as well and after reading the building manual (over and over) I am less nervous.


    Ken and I ordered five minutes apart at Sebring. ( I got there first! )

    I start putting parts together on my birthday (June 26th) I eagerly await the challenge and fun. I agree that this forum has helped to quash the fear of starting this endeaver.

    John and Debra have worked with us here in Florida so that we could ship them together. I'm looking forward to the factory tour.

    Ken... Yours arrives on June 24th...BE THERE!!!

    (2800 miles or bust)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •