Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 6 of 6

Thread: How about a little flyin vid

  1. #1
    kitfoxnick's Avatar
    Join Date
    Jun 2008
    Location
    Northeastern, MD
    Posts
    199

    Default How about a little flyin vid

    Here is a short vid of me landing in the backyard.

    http://www.youtube.com/watch?v=qTW9Iq5ZsAA
    Nick W
    IV 1200
    912Ul
    Warp Taper Tip

  2. #2
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: How about a little flyin vid

    Nice landing, now I just need a bigger back yard.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  3. #3
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,327

    Default Re: How about a little flyin vid

    ah the classic kitfox slip, don't you just love it.
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

  4. #4
    skyfox's Avatar
    Join Date
    Feb 2009
    Location
    San Luis Potosi, Mex.
    Posts
    11

    Default Re: How about a little flyin vid

    Nice landing, besides the side slip-whit how many RPM,s did you final aproached? it seems you got a very good sink rate.


  5. #5
    kitfoxnick's Avatar
    Join Date
    Jun 2008
    Location
    Northeastern, MD
    Posts
    199

    Default Re: How about a little flyin vid

    The Rpms were probably 2200 I'm running a warp taper tip at 11.5 degrees. Any less rpms and the gearbox gets a little loud. The trees are 600' from the threshold, and the fence at the other end is 1000'. So I try to put it on the numbers.
    Nick W.
    Nick W
    IV 1200
    912Ul
    Warp Taper Tip

  6. #6

    Join Date
    Jun 2009
    Location
    Pittsgrove, Southern New Jersey
    Posts
    113

    Default Re: How about a little flyin vid

    Nice strip Nick. Are you now keeping it at your place or still at the airport? Look forward to having you back at one of our events again. Tom from Alloway, NJ.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •