Flaperon riveting

[WISDAN]

I am riveting the trailing edge of the flaperons on my model 4. The manual said to use 3/16 X 1/8 pop rivets. What rivets are most builders using, pop or solid rivets for better looks.

[enyaw]

We used solid "flush" rivets and put them in every 4"

[Dorsal]

Solid and flush for me

[Agfoxflyer]

I used pop rivits originally. Did not like the looks so I drilled them out and used solid rivits. I guess its just personal preferences.

[WISDAN]

Thanks alot for all the input! I will use solid rivets also. Thanks again guys!

WISDAN
IV/1200-Tri Gear
Jabiru 2200