Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Removeable wing tip hardware help.

  1. #1
    Kahle76's Avatar
    Join Date
    Sep 2013
    Location
    Jackson, MO
    Posts
    110

    Default Removeable wing tip hardware help.

    What hardware did you use to attach the removable Hoener wingtips to the aluminum mounting strips? I was planning on using 6x32 rivnuts, but was curious about the screw head style and/or washer type.

    Thanks,
    Mike Kahle
    Mike Kahle
    Jackson, MO
    IV Classic 582
    RV-12is building

  2. #2
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,960

    Default Re: Removeable wing tip hardware help.

    I used the #6 (I believe) phillips pan head screws and nylon washers that came with the kit.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  3. #3
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: Removeable wing tip hardware help.

    Quote Originally Posted by jiott View Post
    I used the #6 (I believe) phillips pan head screws and nylon washers that came with the kit.
    I used 50-some #6 nut plates on the bottom of the aliminum strip and stainless pan screws with nylon washers underneath them.
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  4. #4
    Kahle76's Avatar
    Join Date
    Sep 2013
    Location
    Jackson, MO
    Posts
    110

    Default Re: Removeable wing tip hardware help.

    Thanks Gentlemen.
    Mike Kahle
    Jackson, MO
    IV Classic 582
    RV-12is building

  5. #5
    Senior Member
    Join Date
    Nov 2012
    Location
    Desert Aire (Mattawa), WA
    Posts
    218

    Default Re: Removeable wing tip hardware help.

    The model 7 'standard upgraded' wingtips are attached with (40) AN526-832R10 (#8) screws and nut plates.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •