Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Trim indicator (Dynon )

  1. #11
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: Trim indicator (Dynon )

    Here is what I did. Used a 4-40 rod and Clovis from the hobby shop:
    Attached Images Attached Images
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  2. #12
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: Trim indicator (Dynon )

    And another picture
    Attached Images Attached Images
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  3. #13
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: Trim indicator (Dynon )

    And another view:
    Attached Images Attached Images
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  4. #14

    Join Date
    Dec 2013
    Location
    Uruapan, Mexico
    Posts
    36

    Default Re: Trim indicator (Dynon )

    Quote Originally Posted by N213RV View Post
    And another view:
    Thanknow you very much for the pics Mike. Do you have Dynon stuff?, if you how you did the wire connections?
    Leonardo

  5. #15
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: Trim indicator (Dynon )

    I have the Skyview system. I used the same on my RV-10. I'll check the wiring tomorrow.
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  6. #16

    Join Date
    Dec 2013
    Location
    Uruapan, Mexico
    Posts
    36

    Default Re: Trim indicator (Dynon )

    Quote Originally Posted by N213RV View Post
    I have the Skyview system. I used the same on my RV-10. I'll check the wiring tomorrow.
    OK, thanks again.
    Of what I understand is that the sensor has to connect to the EMS module and only has one wire for this purpose, the sensor has 3 (orange, green and blue ), my guess is the green one. Just want to be sure on this before I continue. Now I know the Ray Allen sensor can be used with the Skyview.
    Leonardo

  7. #17
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: Trim indicator (Dynon )

    http://www.vansairforce.com/communit...p?t-69494.html

    Look at the above link. Looks like orange is power (5v from ems module), blue is ground and green is the sensor output.

    I hope this helps!
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  8. #18

    Join Date
    Dec 2013
    Location
    Uruapan, Mexico
    Posts
    36

    Default Re: Trim indicator (Dynon )

    Quote Originally Posted by N213RV View Post
    http://www.vansairforce.com/communit...p?t-69494.html

    Look at the above link. Looks like orange is power (5v from ems module), blue is ground and green is the sensor output.



    I hope this helps!
    Thanks MIke. ....this solves the trim indicator issue. Will get on it Asp.
    Leonardo

  9. #19

    Join Date
    Dec 2013
    Location
    Uruapan, Mexico
    Posts
    36

    Default Re: Trim indicator (Dynon )

    I would like to thank everybody for the advice on this matter. Here is how I did it, works very good. (I changed de quick link for a new one.)
    Thanks again.IMG-20160816-WA0002.jpg

    IMG-20160816-WA0003.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •