Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Firewall Blanket

  1. #1

    Join Date
    Jun 2008
    Location
    Hopkinsville, Kentucky
    Posts
    46

    Default Firewall Blanket

    About ready to mount the firewall for final installation & wondering what others have done about a firewall blanket or mat. Do you have a blanket on it for fire/sound protection or just leaving it bare?? If a mat is installed, is it on the inside or outside?? I am installing a Cont. 0-200.
    Thanks
    Danny

  2. #2
    Senior Member Peteohms's Avatar
    Join Date
    Sep 2008
    Location
    Leander, TX Hangared @ KGTU
    Posts
    272

    Default Re: Firewall Blanket

    My Kitfox III has a blanket on the engine side.
    Pete
    Leander, TX
    Model III SN 1000
    912
    Grove

  3. #3
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: Firewall Blanket

    On both of my Model IV's the mat is like a pocket, with the metal of the firewall inside. So, the insulation is on both sides of the firewall.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •