Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: ignition wiring 912

  1. #1

    Join Date
    Jun 2016
    Location
    Woodland,PA
    Posts
    50

    Default ignition wiring 912

    I started looking at my ignition wiring and I,am confused, understand this is a used engine.I have my two yellow charging wires a white and blue rpm wires however my browns out of the modules are plugged together with connectors A to A and B to B I have two reds in shielded cable that come out of the rotor in back back of the engine . This does not look like my wiring diagram where the browns are your ignition kill grounds and it does not even show the two red wires anyone know this setup? Ducati ignition

  2. #2
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: ignition wiring 912

    Yellow are alternator wires to the regulator.

    Red wires power the two ignition modules.

    Blue wire is for the tachometer drive.

    http://www.rotax-owner.com/en/suppor...engine-manuals

    Download the current manuals and be sure what you have. Wiring the modules wrong can destroy them and it is extremely expensive to replace them.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •