Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: vent tubes on a 912 drip fuel onto exhaust

  1. 09-22-2010, 07:13 PM #1
    yellow fox
    yellow fox is offline
    Join Date
    Oct 2009
    Location
    ill
    Posts
    10

    Default vent tubes on a 912 drip fuel onto exhaust

    can ad drip trays or i heard that the tubes could be drilled into the air filters just behind the clamp
    Reply With Quote Reply With Quote
  2. 09-22-2010, 07:30 PM #2
    MotReklaw
    MotReklaw is offline
    Senior Member MotReklaw's Avatar
    Join Date
    Oct 2009
    Location
    Anniston, AL
    Posts
    300

    Default Re: vent tubes on a 912 drip fuel onto exhaust

    That's what I did with my first 912. Roger who is on the Matronics Rotax list suggested it. Didn't have a problem after that. You might want to search on the Matronics list for this.

    If you don't subscribe to the Matronics Rotax list, you might want to consider joining....

    Tommy Walker
    Reply With Quote Reply With Quote
  3. 09-22-2010, 07:44 PM #3
    yellow fox
    yellow fox is offline
    Join Date
    Oct 2009
    Location
    ill
    Posts
    10

    Default Re: vent tubes on a 912 drip fuel onto exhaust

    thanks for the reply i will consider joing that group
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules