Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Matco brakes

  1. 01-22-2016, 04:58 PM #1
    jgeorge
    jgeorge is offline
    Join Date
    Aug 2011
    Location
    home,pa
    Posts
    10

    Default Matco brakes

    I am looking for a part number or ordering Information for replacement disc brake pads on my model 3. They have 3 rivets almost 7/8 inches apart, are about 13/16 wide, and around 2 3/4 inches long. The drawing in the builders manual says B3_B4. LBRH -12 R lining.

    Thanks for your time.

    Joe
    Reply With Quote Reply With Quote
  2. 01-22-2016, 07:29 PM #2
    rv9ralph
    rv9ralph is offline
    Senior Member rv9ralph's Avatar
    Join Date
    Aug 2014
    Location
    Greenleaf, ID
    Posts
    620

    Default Re: Matco brakes

    Joe,
    Try this link to Matco: http://www.matcomfg.com/RelineKitsSwiftline-tp2-12.html
    You may find the correct lining there. Good Hunting!
    Ralph
    Reply With Quote Reply With Quote
  3. 01-23-2016, 06:02 AM #3
    jgeorge
    jgeorge is offline
    Join Date
    Aug 2011
    Location
    home,pa
    Posts
    10

    Default Re: Matco brakes

    This looks like what I need.

    http://www.matcomfg.com/BRAKERELINEKIT-idv-3485-12.html

    How can I identify my caliper is WHLB5 etc. Is it stamped somewhere?

    Thanks

    Joe
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules