Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Molex Connector Support

  1. #1

    Join Date
    Mar 2014
    Location
    Lake Isabella, CA
    Posts
    99

    Default Molex Connector Support

    I have several places that use molex connectors (3 pin, 4 pin) in a wiring run. Can you tie the cable down on each side of the connector or is it necessary to somehow directly support the connector?

    Thanks
    tom

  2. #2
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    671

    Default Re: Molex Connector Support

    Those connectors don't have much mass, so tying down the cable on either side seems appropriate. (At least that's what I did, and I haven't had any issues).
    -- Paul S
    Model III SN910
    582 IVO Med

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •