Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Denso 182800-1950 starter solenoid

  1. #11
    Senior Member jrevens's Avatar
    Join Date
    Aug 2009
    Location
    Arvada, CO
    Posts
    2,146

    Default Re: Denso 182800-1950 starter solenoid

    Are you really sure that your battery is good? It sounds like you are using a digital voltmeter, & I believe you should be measuring somewhere around 14 volts with no load, not less than 12.
    John Evens
    Arvada, CO
    Kitfox SS7 N27JE
    EAA Lifetime
    Chap. 43 honorary Lifetime

  2. #12
    Senior Member dholly's Avatar
    Join Date
    Mar 2009
    Location
    Clemmons, NC
    Posts
    285

    Default Re: Denso 182800-1950 starter solenoid

    John, it's a 2 year old gel battery and I believe it read 12.45v at the posts.
    -Aeropro CZ Aerotrek A240 Tri-Gear SLSA 912uls
    -Airdale Avid+ on CZAW Amphibs 'FatAvid Floater' (building)
    -Kitfox 4-1200 TD 912ul (sold)
    -Kitfox Model III TD 582 (R.I.P.)
    -Avid Flyer Mk-IV TD (sold)

  3. #13

    Join Date
    Jan 2010
    Location
    Near OIC
    Posts
    56

    Default Re: Denso 182800-1950 starter solenoid

    Doug, do you have access to a battery load tester? If so load test your battery (for proper amperage output-a battery can show good voltage and still have no amperage load capacity) and than also load test it at bat cable ends, disconnected from airframe (ground) and at solenoid (positive). Remembering frustrating starting problems in automotive repair. This will check the integrity of you battery and cables, have seen problems with cables that look perfectly fine.

  4. #14
    Senior Member dholly's Avatar
    Join Date
    Mar 2009
    Location
    Clemmons, NC
    Posts
    285

    Default Re: Denso 182800-1950 starter solenoid

    Well it was the battery after all. The old battery was an AGM type (absorbed glass mat), not gel as I thought. AGM is supposed to be superior to gel but can't say I would recommend a ETX Magna Power (Deka) AGM based on this experience.

    Thanks again for the input.
    -Aeropro CZ Aerotrek A240 Tri-Gear SLSA 912uls
    -Airdale Avid+ on CZAW Amphibs 'FatAvid Floater' (building)
    -Kitfox 4-1200 TD 912ul (sold)
    -Kitfox Model III TD 582 (R.I.P.)
    -Avid Flyer Mk-IV TD (sold)

  5. #15

    Join Date
    Aug 2010
    Location
    MI
    Posts
    16

    Default Re: Denso 182800-1950 starter solenoid

    I haven't found a dissatisfied user with the Odyssey battery including myself.

    Classic IV 912ul

  6. #16
    Senior Member dholly's Avatar
    Join Date
    Mar 2009
    Location
    Clemmons, NC
    Posts
    285

    Default Re: Denso 182800-1950 starter solenoid

    wwillyard-

    Would you (or anyone) be able to confirm whether the Odyssey PC625 fits in the oem battery box and/or battery tray as included in the KF4-1200 kit w/ 912 FWF? Should have measured before leaving hanger...

    thnx
    -Aeropro CZ Aerotrek A240 Tri-Gear SLSA 912uls
    -Airdale Avid+ on CZAW Amphibs 'FatAvid Floater' (building)
    -Kitfox 4-1200 TD 912ul (sold)
    -Kitfox Model III TD 582 (R.I.P.)
    -Avid Flyer Mk-IV TD (sold)

  7. #17

    Join Date
    Aug 2010
    Location
    MI
    Posts
    16

    Default Re: Denso 182800-1950 starter solenoid

    I can't speak about the 625, but I have the 680 and it doesn't fit the OEM box. The nice feature is that you don't need a box, just a bracket to securely hold the battery in place.

  8. #18
    Senior Member dholly's Avatar
    Join Date
    Mar 2009
    Location
    Clemmons, NC
    Posts
    285

    Default Re: Denso 182800-1950 starter solenoid

    Thanks. I ask because I know the rectangular PC680 won't fit and the more square PC625 looked like a better shot. Also, the PC625 specs looked a bit better to me and it is a bit less $$. If it slipped right into the existing battery box, all the better!

    Specifications PC625

    Pulse (5-second) Hot Cranking Amps (PHCA) 530 Cold Cranking Amps (CCA) 200 20Hr Nominal Capacity (Ah) 18 Reserve Capacity Minutes 27 Dimensions L x W x H (in) 6.7x3.9x6.89 Metric Dimensions L x W x H (mm) 170.2x99.1x175 Weight (lbs) 13.2 Weight (kg) 6

    Specifications PC680

    Pulse (5-second) Hot Cranking Amps (PHCA) 520 Cold Cranking Amps (CCA) 170 20Hr Nominal Capacity (Ah) 16 Reserve Capacity Minutes 24 Dimensions L x W x H (in) 7.15 x 3.00 x 6.65 Metric Dimensions L x W x H (mm) 181.5 x 76.3 x 167.8 Weight (lbs) 15.4 Weight (kg) 7
    -Aeropro CZ Aerotrek A240 Tri-Gear SLSA 912uls
    -Airdale Avid+ on CZAW Amphibs 'FatAvid Floater' (building)
    -Kitfox 4-1200 TD 912ul (sold)
    -Kitfox Model III TD 582 (R.I.P.)
    -Avid Flyer Mk-IV TD (sold)

  9. #19
    Senior Member
    Join Date
    Jul 2011
    Location
    milwaukee wi
    Posts
    490

    Default Re: Denso 182800-1950 starter solenoid

    I am using the Odessey 545mj and had to lengthen the tray. The 625 is even longer, but it is a simple modification.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •