Replacing the engine mount

[Peteohms]

I ordered hose for my rubber replacement and almost had a heart attack at the 460.00 bill and the tiny box of assorted hoses. They added up to a little over 10 feet of hose.....

All hoses on my plane came from auto parts or truck parts stores. Couldn't have cost more than $150-$200. I'd be tempted to skip the expensive stuff unless you are making a show plane.

[Peteohms]

Painted and riveted externally. I did start the bend with the a sheet metal brake.

I used exterior double sided foam tape to attach my sheet metal trim tabs. 4 years and still attached.

[mcomeaux53]

requires replacement of Service Bulletetin SB #54 A
Bushings And shortened tubes. Anyone have a source we
can purchase these items? Regards Mike

[Av8r3400]

You can buy them from Kitfox or you can just shorten the ones you have with a bench grinder or even an angle grinder.