Supporting vendors:
 
Your ad here?
 

Go Back   TeamKitfox Forums > Discussion > Kitfox general discussion

Reply
 
Thread Tools Display Modes
Old 10-12-2017, 08:05 AM   #1
southwind32
 
Join Date: May 2017
Location: Modesto CA
Posts: 140
Default Poly Fiber or Stewart covering system??

Looking for pros and cons on the above systems. I was planning on using the Poly Fiber process, but the more I learn about the Stewart system, the more I'm considering it. What's your experience.
Thanks
Brian
southwind32 is online now   Reply With Quote
Old 10-12-2017, 03:32 PM   #2
jmodguy
Senior Member
 
jmodguy's Avatar
 
Join Date: Jul 2014
Location: Carmel, IN
Posts: 317
Default Re: Poly Fiber or Stewart covering system??

I am not a fan of MEK. Used it enough and if theres an alternative, its worth it.
I am using Stewarts on my Kitfox. Its easy to use and there are no hazardous fumes. You can actually attach the fabric and roll the primer in your living room and no one will smell anything!
__________________
Jeff
KF 5
340KF (Reserved)
jmodguy is offline   Reply With Quote
Old 10-12-2017, 03:47 PM   #3
Clark in AZ
 
Join Date: Sep 2015
Location: Cave Creek, AZ
Posts: 23
Default Re: Poly Fiber or Stewart covering system??

Subscribed!
Clark in AZ is offline   Reply With Quote
Old 10-12-2017, 05:50 PM   #4
Geowitz
Senior Member
 
Geowitz's Avatar
 
Join Date: Mar 2010
Location: Middle North Carolina
Posts: 440
Default Re: Poly Fiber or Stewart covering system??

I used Stewarts. I love it. I love the glue and ekofill. So easy to work with. All non toxic and you can start and stop at pretty much any point in the process. Just tidy up the glue joints/fill layer you've initiated, put the cap on the bottle, and walk away. Paint was a little tricky, but no more than any other paint. You just have to follow the directions. After experiencing both covering systems for me Stewarts is so much more home builder friendly. Like I said above, it's just so easy to stop anywhere and pick right back up where you left off whether it's the next day or 2 weeks later. And it's not one of those products that claims to be "non toxic and eco friendly", but is inferior compared to it's traditional competition. It works just as well as any other covering system and covers all of the specs for STC'd covering.

I believe all of their instructional videos are on YouTube. Makes it real easy to learn the process.

Last edited by Geowitz; 10-12-2017 at 06:04 PM.
Geowitz is offline   Reply With Quote
Old 10-13-2017, 07:11 PM   #5
Cherrybark
 
Cherrybark's Avatar
 
Join Date: Dec 2015
Location: Near Tyler, TX
Posts: 197
Default Re: Poly Fiber or Stewart covering system??

Brian,

You probably already know Stewart sells a fabric "practice" kit with everything you need to cover a small test panel. I purchased the kit before deciding to use Oratex. If you are interested in trying it, PM your address and I'll ship it to you. Probably has to go via Ground so it will take a few days.

http://www.stewartsystems.aero/produ...c-practice-kit
__________________
Carl Strange
Cherrybark is online now   Reply With Quote
Old 10-13-2017, 07:52 PM   #6
southwind32
 
Join Date: May 2017
Location: Modesto CA
Posts: 140
Default Re: Poly Fiber or Stewart covering system??

Quote:
Originally Posted by Cherrybark View Post
Brian,

You probably already know Stewart sells a fabric "practice" kit with everything you need to cover a small test panel. I purchased the kit before deciding to use Oratex. If you are interested in trying it, PM your address and I'll ship it to you. Probably has to go via Ground so it will take a few days.

http://www.stewartsystems.aero/produ...c-practice-kit
Thank You...........I sent you a private message.
southwind32 is online now   Reply With Quote
Old 10-15-2017, 07:10 AM   #7
aviator79
 
Join Date: Dec 2016
Location: Los Alamos, NM
Posts: 14
Default Re: Poly Fiber or Stewart covering system??

Polyfiber sells a similar kit. You can buy it from Aircraft Spruce. You could get a legit side-by-side comparison and report back.
link to polyfiber kit
aviator79 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:58 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.