Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: 582 condition inspection

  1. #1
    jonstark's Avatar
    Join Date
    Nov 2013
    Location
    Ashfield, MA
    Posts
    149

    Default 582 condition inspection

    Does anyone have a condition inspection checklist for the Rotax 582?

    Thx,
    Jon
    Kitfox IV 1050, C180. Now I have two backcountry planes! WooHoo!

  2. #2
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,960

    Default Re: 582 condition inspection

    I'm sure Rotax has a 100 hour checklist, which should suffice for an annual.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  3. #3
    Senior Member kmach's Avatar
    Join Date
    Nov 2009
    Location
    Cupar, SK, Canada CLC4 Loon Creek Airfield
    Posts
    641

    Default Re: 582 condition inspection

    Go to www.rotax-owner.com , look under support/bulletins then manuals. Find your engine type and look for the line maintenance manual , which will have the inspections in it.
    Kevin,

    Kitfox Outback
    912 ULS
    Airmaster AP332CTFH-WWR70W
    Summit Aircraft Wheel Skis
    C-FOXW

  4. #4
    jonstark's Avatar
    Join Date
    Nov 2013
    Location
    Ashfield, MA
    Posts
    149

    Default Re: 582 condition inspection

    Got it. Going to use the SCHEDULED MAINTENANCE CHECKS matrix in the maint manual.

    My DAR put me on the spot yesterday when he asked how/when/if compression checks are required. Not knowing much at all about two cycle engine mx he had me stumped.

    I've got SO much to learn!

    jon
    Kitfox IV 1050, C180. Now I have two backcountry planes! WooHoo!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •