Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: repair the Warp Drive or switch to ??

  1. #1

    Join Date
    Jan 2018
    Location
    Vernon, BC
    Posts
    59

    Default repair the Warp Drive or switch to ??

    the model IV I purchased has a prop in need of repairs, Warp Drive quoted $390 US .. it's a 3 blade ground adjustable .. 80hp 912 .. would you go ahead with the repairs, or use that $ towards something superior?

    then there is the option of in flight adjustable - money can be an 'object' even without a partner to complain about the cost of toys! but the payback for the extra investment, comments please!

  2. #2
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,960

    Default Re: repair the Warp Drive or switch to ??

    From comments I have heard and my own experience, I would recommend the 3-blade Whirlwind as a superior GA prop. Its definitely more expensive but is of the latest low noise, smooth and efficient design (plus it looks way cooler). IFA and CS props are of course another step up if you have the bucks.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  3. #3
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,562

    Default Re: repair the Warp Drive or switch to ??

    Do you just need one replacement blade? I was just on their site this morning, and see the prices went up. (if my memory is right) I just picked up 2 66" RH blades from someone today. They are unused, but probably to short for your needs. JImChuk

  4. #4
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default Re: repair the Warp Drive or switch to ??

    If I had $300 and thought this would be enough to entice me to spend it towards a CS.... no brainer.

  5. #5
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: repair the Warp Drive or switch to ??

    Right now the ground adjustable to beat is the Luga prop.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  6. #6
    Senior Member rv9ralph's Avatar
    Join Date
    Aug 2014
    Location
    Greenleaf, ID
    Posts
    618

    Default Re: repair the Warp Drive or switch to ??

    What is the age of your 80hp 912. Early 912 engines have a different prop flange than newer models. When Rotax introduced the 100hp ULS they changed the flange on all 912 engines. Most prop hubs are now for the newer bolt pattern. Warp and GSC still make hubs for the older engines. Whirlwind along with many others do not make hubs that fit the older bolt pattern.

    Ralph

  7. #7

    Join Date
    Jan 2018
    Location
    Vernon, BC
    Posts
    59

    Default Re: repair the Warp Drive or switch to ??

    great comments so far ........ it's the early version prop flange, didn't realize rotax had changed them ... guess that's going to make the decision easier ..

  8. #8

    Join Date
    Jan 2018
    Location
    Vernon, BC
    Posts
    59

    Default Re: repair the Warp Drive or switch to ??

    my hub and good blade is 70 inch, thanks for letting me know some were available

  9. #9
    Senior Member Norm's Avatar
    Join Date
    May 2013
    Location
    Airdrie, North of Calgary
    Posts
    346

    Default Re: repair the Warp Drive or switch to ??

    Consider the IVO IFA. Don (KitFox2009 from Vernon) has one in his Model V on an 80hp 912. I have one on my Model IV round nose with an 80hp 912. I am happy with mine and I am sure Don is happy with his. It is a great way to get the 100hp performance without going to a new motor and you may be able to find a used one for a reasonable price. Good performance at a reasonable price. Not the latest and greatest but a very good performer on a bit of a budget.
    Norm
    Airdrie Ab, Can
    North of Calgary
    Flying SuperFox Model IV

  10. #10

    Join Date
    Jan 2018
    Location
    Vernon, BC
    Posts
    59

    Default Re: repair the Warp Drive or switch to ??

    Norm, what diameter and how many blades are you running .. and did you have something else beforehand with some comparison numbers?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •