Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: rejex

  1. #1
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default rejex

    How many of you are using rejex barrier and stain remover. Are you using it on the entire plane in place of carnuba wax, or over top of wax just on leading edges?

  2. #2
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: rejex

    Forgot to mention that I used polytone on my unfinished plane.

  3. #3
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: rejex

    I never heard of the product. Tell us more.

    I just use carnauba wax on my Poly Tone.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  4. #4
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: rejex

    Quote Originally Posted by Av8r3400 View Post
    I never heard of the product. Tell us more.

    I just use carnauba wax on my Poly Tone.
    Well, i was doing an internet search on silicone free wax and found mention of the product REJEX. So i checked the aircraft spruce websight and they sell it. Supposed to be very slick to make wipe down of bugs, exhaust, fuel stains, etc, easy. Just not sure if it should be used as an overall substitute for wax.

  5. #5
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: rejex

    I use Lucas Slick Spray Mist..since I have put it on ..even 2 weeks after flying..bugs wipe right off
    Chase
    Model 5 OutBack
    912 UL

  6. #6
    Senior Member Flybyjim's Avatar
    Join Date
    Jul 2013
    Location
    Marysville, Pa.
    Posts
    585

    Default Re: rejex

    I have been using rejig for the past 4 years on my RansS-7 that is painted with a gloss finish. This is the only polish I have ever put on the plane. I have applied twice to the whole plane and once a year at annual on the leading edges, cowl and prop. Bugs are very easy to remove with plane water.

  7. #7
    Senior Member Wheels's Avatar
    Join Date
    Oct 2010
    Location
    Spokane Wa
    Posts
    420

    Default Re: rejex

    I use mop n glo on a soft rag. only on the fiberglass. It shines like its wet and strips off with warm water and some dish soap if I want it off.
    I don't treat the fabric (polytone) but the plane is hangared and kept clean.
    What is a good product for fabric?
    Last edited by Wheels; 03-30-2015 at 11:02 AM. Reason: spelling error

  8. #8
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: rejex

    I like the Lucas Spray Mist
    Chase
    Model 5 OutBack
    912 UL

  9. #9
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: rejex

    Quote Originally Posted by Wheels View Post
    I use mop n glo on a soft rag. only on the fiberglass. It shines like its wet and strips off with warm water and some dish soap if I want it off.
    I don't treat the fabric (polytone) but the plane is hangared and kept clean.
    What is a good product for fabric?

    I use plain carnauba wax from the aircraft section at Oreileys on my Poly Tone and Pledge furniture polish on the plexi.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  10. #10
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,565

    Default Re: rejex

    Carnauba wax is the only product I've seen Poly Fiber recommend for use on their fabric systems. That's what I use on my PolyTone finish.
    Plexus on the windshield.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •