Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Northstar F210 Digital Single Engine Fuel Computer

  1. #1
    84KF
    Guest

    Default Northstar F210 Digital Single Engine Fuel Computer

    Northstar F210 Digital Single Engine Fuel Computer......
    Does any one have experience with this product, especially in a Rotax 912UL? http://www.northstarnav.com/Products...ent/F210-Fuel/
    How reliable (meaning safe) is the transducer as it seems to be a simple in-line (no secondary bypass) installation?
    Any input regardless would be appreciated.

    Steve
    Milford Mi.
    84KF KF5/912UL

  2. #2
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Northstar F210 Digital Single Engine Fuel Computer

    I located mine just above the gasolater and before the fuel pump. It's verticle and works great. Love it!
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  3. #3
    kitfoxnick's Avatar
    Join Date
    Jun 2008
    Location
    Northeastern, MD
    Posts
    199

    Default Re: Northstar F210 Digital Single Engine Fuel Computer

    I installed mine the same as skysteve works great. I calibrated at 10gal was so close I didn't change a thing. I now have 48 gal thru it and am going to calibrate again. One thing, make sure you have filtration below 30 microns to protect the transducer. Also put heat sheild over it if foward of the firewall.
    Nick
    Nick W
    IV 1200
    912Ul
    Warp Taper Tip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •