Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Model IV smooth cowl

  1. #1
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Model IV smooth cowl

    Does anyone out there have a model IV with the smooth cowl? I am considering this on my project plane but would like to see some photos of what one of these looks like and how the visibility over the nose changes (or doesn't) with this difference.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  2. #2
    Senior Member Geowitz's Avatar
    Join Date
    Mar 2010
    Location
    Middle North Carolina
    Posts
    456

    Default Re: Model IV smooth cowl

    In my albums there are a bunch of pics. Let me know if you need more.

    There's definitely more room and I like the look better. My Kitfox reminds me of a mini Cessna 185. Visibility is better as the top slopes down to the thrust line which is the same as the round cowl.

    * Also, in the "Engine" forum there are some closer pics on the "HKS 700T" thread.
    Last edited by Geowitz; 11-23-2011 at 10:51 AM.

  3. #3
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: Model IV smooth cowl

    I knew there had to be someone out here with one. Thanks!

    What was confusing me was/is the bump on the top of the SS cowl for the gearbox. I didn't know if this was also on the III/IV smooth cowl. The yellow plane below must be a IV with a 912 and the two part smooth cowl (note the belly radiator) where the blue and white plane is the later model (SS?) four part cowl with the radiator inside the cowl.

    Which motor are you using?

    Thanks again.




    Last edited by Av8r3400; 11-23-2011 at 11:01 AM.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  4. #4
    Senior Member Geowitz's Avatar
    Join Date
    Mar 2010
    Location
    Middle North Carolina
    Posts
    456

    Default Re: Model IV smooth cowl

    One more thing - The top half of the firewall is different than the round cowl. It has more of a shoulder than a rounded top. This makes the windshield fit a little different also, but not too hard to adjust. I just got a scrap sheet of stainless from our local ornamental metal shop to cut a new one from.

  5. #5
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: Model IV smooth cowl

    I'm not concerned about the firewall because I need to build a complete new one. The one that was on my project looked like swiss cheese...

    My project is basically a total rebuild, not just a recover.

    Last edited by Av8r3400; 11-23-2011 at 11:06 AM.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  6. #6
    Senior Member Geowitz's Avatar
    Join Date
    Mar 2010
    Location
    Middle North Carolina
    Posts
    456

    Default Re: Model IV smooth cowl

    Yeah, the second pic is an SS. The bump on the model IV cowl isn't toally neccessary for the gearbox clearance. More of a visual/style thing because it doesn't get as narrow as the SS does at the tip of the nose of the cowl. In other words it has more height at the front/hub.

    I am using the HKS 700T. My thread in the engine forum will be following my progress. Starting on the engine mount this weekend.

  7. #7
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,044

    Default Re: Model IV smooth cowl

    I just was looking at the 700T thread and it took me a minute to realize that was your installation. Sorry, here's my sign...
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  8. #8
    Senior Member dholly's Avatar
    Join Date
    Mar 2009
    Location
    Clemmons, NC
    Posts
    285

    Default Re: Model IV smooth cowl

    Larry-

    This is Ron Seyffer's model 4 w/ 912ul and smooth cowl. I think the smooth cowl looks great and offers much improved visibility, particularly with a TD. Unless you're totally enamored with the round cowl look, I would do it. Actually, I'm looking for a KF 5-6 smooth cowl myself right now.

    Doug
    Attached Images Attached Images
    -Aeropro CZ Aerotrek A240 Tri-Gear SLSA 912uls
    -Airdale Avid+ on CZAW Amphibs 'FatAvid Floater' (building)
    -Kitfox 4-1200 TD 912ul (sold)
    -Kitfox Model III TD 582 (R.I.P.)
    -Avid Flyer Mk-IV TD (sold)

  9. #9
    Senior Member cubtractor's Avatar
    Join Date
    Jul 2011
    Location
    Carl Junction, MO
    Posts
    241

    Default Re: Model IV smooth cowl

    Here is a pic of my Model IV that I just finished rebuilding with a smooth cowling. Hope it helps
    Attached Images Attached Images
    Mike Bentley
    Model IV-1200
    Jabiru 2200A #438
    Rotec Aerosport LCH Heads
    Ellison EFS-2 Throttle Body
    Prince Prop (64x34)
    My SPOT Page

  10. #10
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Re: Model IV smooth cowl

    Quote Originally Posted by cubtractor View Post
    Here is a pic of my Model IV that I just finished rebuilding with a smooth cowling. Hope it helps
    She looks very clean Mike. I like the yellow w/ black...nice contrasting with the jury strut.
    Dan
    Dan B
    Mesa, AZ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •