Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Poly Fiber or Stewart covering system??

  1. #21

    Join Date
    May 2017
    Location
    Modesto CA
    Posts
    185

    Default Re: Poly Fiber or Stewart covering system??

    Quote Originally Posted by efwd View Post
    Not a very complete Data Sheet. It does not address what kind of personal protective gear you would need to apply. Since it contains Icocyanates I find it difficult to believe it is safe enough to use without a specific type of air filter mask at a minimum. Wonder why that is not covered in that data sheet?
    Eddie
    There's additional details on there website. They recommend a good charcoal filter respirator.

  2. #22
    kitfoxjim's Avatar
    Join Date
    Dec 2010
    Location
    Calgary, AB
    Posts
    38

    Default Re: Poly Fiber or Stewart covering system??

    What I see as the main difference is that Stewart Systems uses distilled water for thinning as opposed to MEK or other solvent based thinner. Using a HVLP sprayer which minimizes overspray and a suitable mask to avoid inhaling particulate is much less toxic IMHO. I have used 3 different systems and in future Stewart's is the only one for me!
    Jim Corner
    KF2 582 1150 hrs
    KF5 O-360 1150 hrs

  3. #23
    Senior Member chefwarthog's Avatar
    Join Date
    Dec 2010
    Location
    Nicolet, Quebec, Canada
    Posts
    269

    Default Re: Poly Fiber or Stewart covering system??

    Is there a significant difference of weight between the two in its finite state?
    Eric Therrien
    Nicolet, Qc. Ca.
    In preparation.

  4. #24
    kitfoxjim's Avatar
    Join Date
    Dec 2010
    Location
    Calgary, AB
    Posts
    38

    Default Re: Poly Fiber or Stewart covering system??

    I don't think there is a significant difference in system weight. More likely depends on application skills and finish desired.
    Jim Corner
    KF2 582 1150 hrs
    KF5 O-360 1150 hrs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •