Artex ELT-200 pinouts

Printable View

11-22-2011, 05:42 PM
jtpitkin06

Artex ELT-200 pinouts

Help needed.

Looking for info on wiring the remote switch for an Artex ELT-200.

My ELT has a ROUND four pin connector with the pins in a square pattern. Not the phone jack. Not the 9 pin DIN jack.

If you have an Artex ELT-200 unit in your plane or a manual in possession I need the pinouts for the round plug to the switch.

Yes… I tried the obvious contact to Artex and their website. They no longer support the ELT-200 because it is a 121.5 -243.0 ELT even though it is perfectly legal to buy, sell, install, or transmit. All manuals and diagrams for the 121.5/243.0 beacons have been pulled from their website.

I also looked around my local airport. So far no luck but I’ve only looked at four airplanes. They all have ACR units. So I'm posting on the forums.

JP
12-11-2012, 08:11 AM
High Country

Re: Artex ELT-200 pinouts

Did you ever get an answer to how to wire the ELT 200 i recently purchased one for my project and need to find out how to wire it. Also is there any pdf manuals that I can download for this ELT.

Thanks Robert
12-15-2012, 10:34 PM
jtpitkin06

Re: Artex ELT-200 pinouts

Quote:

Originally Posted by High Country

Did you ever get an answer to how to wire the ELT 200 i recently purchased one for my project and need to find out how to wire it. Also is there any pdf manuals that I can download for this ELT.

Thanks Robert

Nope... never got an answer. I put it on the back burner for now. I plan to get out the meter and figure it out myself. When I do I'll post it here. Give me a week or so.

John
12-16-2012, 02:35 AM
kebopa3

1 Attachment(s)

Re: Artex ELT-200 pinouts

John, Robert,
This may not be of any help but thought I'd try.
Kebo
12-16-2012, 08:56 AM
jtpitkin06

Re: Artex ELT-200 pinouts

Kebo,

Thanks... just what I needed. That diagram shows the 4 pin connector.

John
12-16-2012, 04:27 PM
Dutch

1 Attachment(s)

Re: Artex ELT-200 pinouts

Looks like you have it covered , but maybe this will help.

Dutch Attachment 4077
12-17-2012, 07:58 AM
jtpitkin06

Re: Artex ELT-200 pinouts

Thanks Dutch, that helps, too.

JP
08-11-2014, 08:19 PM
kangus

Re: Artex ELT-200 pinouts

I've been trying to wire a toggle to operate the ELT 200, not that I'm cheap or anything but my panel had room for an LED and mini locking toggle. I can get the LED to light when the ELT is ON but I can't get the toggle to switch the ELT ON.
Thanks for any help here.
07-31-2015, 12:55 PM
PaulYardy

Re: Artex ELT-200 pinouts

Kangus,
Did you manage to get your remote ELT to work?

I have en ELT-200 but need the switch assembly for the panel and I'll make up a cable.

Paul
04-25-2020, 11:02 AM
Darrell

Re: Artex ELT-200 pinouts

Quote:

Originally Posted by jtpitkin06

Nope... never got an answer. I put it on the back burner for now. I plan to get out the meter and figure it out myself. When I do I'll post it here. Give me a week or so.

John

I have a complete manual for the Artex 200 install which includes the correct wiring drawing. Some the pictures above are incorrect. If anyone needs the manual please E-Mail to me at roxtonravine@yahoo.com