Printable View
What are these tabs for? I started to use them for a ground location but I thought I should ask first.
Attachment 9327
What are these tabs behind the baggage area for?
Attachment 9330
And finally, where is the drawing V29 in the manual?
Attachment 9329
The tabs in the baggage area are if you want to extend your baggage area you have tabs there to drill into.
V29 should be in there very first chapter of the manual under builder tips I think....
I used the one behind the firewall to attach a support tube to the upper edge of the instrument panel near center. I am pretty sure the kit came with the support tube.
Thanks guys. I guess I will blank off the heater ports and save them just in case I install a heater later.
I used those tabs for exactly that. I made a bus bar for grounding and attached it between the two tabs.Quote:
Originally Posted by TahoeTim
"And finally, where is the drawing V29 in the manual?"
Section G Figure G-1 would be correct.. not V29.
Thanks. I recently received an updated build manual that I keep at home for night reading. Low and behold, the page was there. I will be able to finish up the rigging tonight.