Re: Mile stone met today!!
Great news!!!! :D PROGRESS!!!!!!!!!!:)
Re: Mile stone met today!!
Way to go Stan! Congrats! :D
Re: Mile stone met today!!
Congrats. Stan. A little effort everyday and those milestone will continue to appear for you.
Good luck with the covering process. I have no experience with the Stewarts process but have heard good things. It may surprise you but the covering was the highlight of my build. You'll enjoy the feeling of rapid progress as the covering goes on. Your dream really takes shape during this part of the build. Have fun.
Re: Mile stone met today!!
Kitfox friends, I ended up having surgery last year and with the nasty cold winter only did some inside work on my panel. But I am now covering. Since I am using the Stewart System, I was wondering if we can rename this thread as Stewart System and those of us using the system could post and share here. I will post some photos as I go along. I started with the elevators as they are fairly easy. They have been heat shrinked to 250 degrees. After trying a Black & Decker from Walmart and another brand from JoAnns Fabric, I finally ordered one from ACS and it arrived today. I have the first blanket on the right wing glued and shrunk to 250 degrees. Tomorrow I will do the second blanket. Hope to hear from others. Good to be back in the build.
Re: Mile stone met today!!
I know what you mean about the irons , they can drive you nuts trying to calibrate the temp . then if you can calibrate one the temperature cycles so much your not sure how much you've shrunk the fabric . I deep sixed all the irons and ordered a ski wax iron and solved all those problems .
good luck and have fun
Re: Mile stone met today!!
The iron from ACS seems to work just fine. The right wing is covered and shrunk to 250. Tomorrow I will shrink it to 350 and do the finish tapes and I hope get the UV Sealer on (two cross coats with a brush) and start the 2nd wing.
Cap01 what is unique about the ski wax iron? If it keeps an even temp and can get to the 350 degrees I am interested. The ACS iron is a steam iron so does have an auto shutoff which is a pain.
Re: Mile stone met today!!
the wax iron I have goes to 320, which is plenty for me . I don't shrink to 350 . they heat up really fast . the one. I have is the cheap one , since I didn't know anything about them I figured I've spent more than 60 bucks on other things that didn't turn out so well. I forget what the heat tolerance is but it's something crazy like + - 5 degrees . the one I have is 800 w and the better one is 1200w and has a digital temp readout on the handle . not sure the advantage of the 1200w as it's max temp is also 320 f . they aren't shaped like a cloths iron but rather a rectangle with a 1/2 base . these irons were mentioned in the kitplane magazine that had the write up about oratex . I also think these are the irons that oratex will sell you . the cheap one worked great for me on my last project but I regret not popping for the better model with the temp readout .
have fun with your project
Re: Mile stone met today!!
Well folks, I for the life of me don't know why I put myself under such pressure. Rib lacing is a piece of cake and fun! :) Thank you Jeff Bock for your timely phone call yesterday. And I say again, if you fly into Felts Field again, and need to spend the night, we have a bed and victuals. Enjoyed our conversation. Look forward to seeing your SS7.
Re: Mile stone met today!!
Finished rib lacing my right wing and working by myself, it takes me about 30 minutes per rib. I didn't have to do my morning walk this morning; I got it done walking back and forth pulling cord. :p Now I am trying to do the perimeter tape around the elevator without using bias tape. Stewart System video shows that it is real easy. Not for me! :confused: We will try it again tomorrow. I am having so much fun building again. :)