-
1 Attachment(s)
Electric trim fail
Hi,
My Model IV trim motor stopped moving in the down position one day a while back. I held the trim button down hard for a moment and it actuated the trim tab. So I think it is the switch. I read about the motor failing with excessive grease contaminating motor electrical, but I'm starting here. Do I need to disassemble this switch wiring to clean contacts? Are these things soldered into the chinaman hat switch? Ideas? comments?
Thank you in advance.
-
Re: Electric trim fail
Replace. Of coarse thats after you have verified all your wires are connected appropriately.
Read AeroElectric chapter on switches. The book is free Online, Just have to download.
-
Re: Electric trim fail
switch the switch, couldn't resist.
I suspect the switch, I think I am on my third switch, its the consul mounted one.
The contacts in the switch arc and burn , there only good for so many cycles.
-
1 Attachment(s)
Re: Electric trim fail
Thanks for the reply. I'll order a switch from Spruce after I read the material you suggested. Thanks again. While the engine install has gone slowly considering it was supposed to be "like Item" replacement, I am overall happy with the progress. Here is a pic of the inspection happening.